Little Giant Chicken Waterer Replacement Parts: A Comprehensive Guide.

I understand the importance of keeping my flock hydrated, and a reliable waterer is a key component in achieving this. Little Giant chicken waterers are popular among backyard chicken keepers, and with regular use, parts can wear out or break, requiring replacement.

In this article, I will provide a comprehensive guide on Little Giant chicken waterer replacement parts, including how to identify which parts you need, where to purchase them, and how to install them.

Introduction to Little Giant Chicken Waterers

Little Giant is a brand of chicken waterers that are known for their durability and ease of use. They come in various sizes and styles to accommodate different flock sizes and environments. Some of the popular Little Giant chicken waterers include:

1. Little Giant Plastic Dome Waterer – This waterer has a plastic dome-shaped reservoir that can hold up to 1.5 gallons of water. It is designed to be gravity-fed, which means that the water flows down into the base as the chickens drink from it.
2. Little Giant Galvanized Steel Waterer – This waterer is made of galvanized steel, making it rust-resistant and durable. It comes in different sizes, with the largest holding up to 8 gallons of water.
3. Little Giant Automatic Poultry Waterer – This waterer has a float valve that automatically refills the water bowl as the chickens drink from it. It is made of heavy-duty plastic and can hold up to 5 gallons of water.

While these waterers are designed to last for a long time, parts can wear out or break over time. It is important to replace these parts promptly to ensure that your chickens have access to clean and fresh water at all times.

Identifying the Little Giant Chicken Waterer Replacement Parts You Need

Before you can replace any parts on your Little Giant chicken waterer, you need to identify which parts you need. The parts that commonly need replacing include:

1. O-ring – The O-ring is a small rubber ring that creates a seal between the reservoir and the base. It prevents water from leaking out of the reservoir and into the base. If the O-ring is damaged or worn out, you may notice water leaking from the waterer.
2. Valve – The valve is responsible for controlling the flow of water from the reservoir to the base. If the valve is not working properly, the water may not flow as it should, or it may not flow at all.
3. Float valve – The float valve is only found on the Little Giant Automatic Poultry Waterer. It is responsible for automatically refilling the water bowl as the chickens drink from it. If the float valve is not working properly, the water bowl may not refill as it should.
4. Base – The base is part of the waterer that the chickens drink from. It can become cracked or damaged over time, and it may need to be replaced.
5. Reservoir – The reservoir is part of the waterer that holds the water. It can become cracked or damaged over time, and it may need to be replaced.

Once you have identified which part you need, you can proceed to purchase the replacement part.

Where to Purchase Little Giant Chicken Waterer Replacement Parts

There are various places where you can purchase Little Giant chicken waterer replacement parts. Some of the popular options include:

1. Amazon – Amazon has a wide range of Little Giant chicken waterer replacement parts, including O-rings, valves, and bases.
2. Tractor Supply Co. – Tractor Supply Co. carries a wide range of Little Giant chicken waterers and replacement parts. They have physical stores in most states and an online store where you can purchase replacement parts.
3. Little Giant’s website – Little Giant has an online store where you can purchase replacement parts for your Little Giant chicken waterer. They offer a wide range of replacement parts, including O-rings, valves, bases, and reservoirs.
4. Local feed stores – Many local feed stores carry Little Giant chicken waterers and replacement parts. They are a great option if you need the replacement part quickly and don’t want to wait for shipping.

When purchasing replacement parts, make sure that you are buying the correct part for your specific Little Giant chicken waterer model. Double-check the model number before making your purchase to avoid buying the wrong part.

Installing Little Giant Chicken Waterer Replacement Parts

Installing replacement parts on your Little Giant chicken waterer is relatively easy, and most parts can be replaced without any special tools or expertise. Here is a step-by-step guide on how to replace some of the common Little Giant chicken waterer replacement parts:

Replacing the O-ring

1. Step 1: Turn off the water supply to the waterer.
2. Step 2: Remove the reservoir from the base.
3. Step 3: Remove the old O-ring from the base and replace it with the new O-ring.
4. Step 4: Reattach the reservoir to the base.

Replacing the Valve

1. Step 1: Turn off the water supply to the waterer.
2. Step 2: Remove the reservoir from the base.
3. Step 3: Remove the old valve from the base and replace it with the new valve.
4. Step 4: Reattach the reservoir to the base.

Replacing the Float Valve

1. Step 1: Turn off the water supply to the waterer.
2. Step 2: Remove the water bowl from the base.
3. Step 3: Remove the old float valve from the base and replace it with the new float valve.
4. Step 4: Reattach the water bowl to the base.

Replacing the Base

• Step 1: Turn off the water supply to the waterer.
• Step 2: Remove the reservoir from the base.
• Step 3: Remove the old base from the waterer and replace it with the new base.
• Step 4: Reattach the reservoir to the base.

Replacing the Reservoir

1. Step 1: Turn off the water supply to the waterer.
2. Step 2: Remove the old reservoir from the base and replace it with the new reservoir.
3. Step 3: Reattach the base to the new reservoir.

Conclusion

Little Giant chicken waterers are a popular choice among backyard chicken keepers due to their durability and ease of use.

However, parts can wear out or break over time, requiring replacement. By identifying which part you need, purchasing the replacement part from a reputable seller, and following the installation instructions, you can easily replace the damaged or worn-out part on your Little Giant chicken waterer. With a little bit of maintenance, your Little Giant chicken waterer will provide your flock with clean and fresh water for years to come.